Panasonic PT-D10000U manual Side Top Bottom, Menu, Lock button, Remote control transmitter window

■ Side ■ Top

9

8

■ Bottom

:

Getting Started

1 SHUTTER button		(p. 43)
Press this button to black out the image
temporarily.
2 ASPECT button		(p. 45)
Switches the image aspect ratio.
3 LENS (FOCUS, ZOOM, SHIFT) button		(p. 37)
These buttons are used to adjust the projection
lens.
4 Function 1 (FUNC1) button		(p. 44)
This button can control the functions set in
“FUNC1” of the “OPTION1” screen from MAIN
MENU.
5 DEFAULT button		(p. 48)
Press this button to restore the default factory
setting.
6 ID SET button	(pp. 18, 75)
When two or more main units are used in the
system, this button specifies the ID of the remote
control.
7 ID ALL button	(pp. 18, 75)

When two or more main units are used in the system, this button switches to the mode to control them simultaneously with a single remote control.

8LOCK button

This button is used to prevent unintentional operation of the projector by accidentally pressing a button, and to prevent the remote control batteries from becoming spent.

9Remote control transmitter window

Operate the remote control aiming at the remote control receiver window on the main unit.

:Remote control wired terminal.................. (p. 18) To use the wired output terminal, connect the remote control and the main unit with the cable (sold separately).

Note

•The AUX button to switch the input is disabled when an optional input module is not connected.

ENGLISH – 13