Hitachi RAS-SX13HAK / RAC-SX13HAK Contact Your Sales Agent Immediately On Following Cases

TROUBLESHOOTING (continued)

CONTACT YOUR SALES AGENT IMMEDIATELY ON FOLLOWING CASES

In the event that any trouble or phenomenon listed below still occurs even after a check has been conducted according to the troubleshooting procedures on page 41~44 , disconnect the power plug from the outlet (or switch off the circuit breaker) and immediately contact your sales agent.

•The circuit breaker switches off or the fuse blows frequently.

•The switch operation is not stable.

•Foreign matter or water accidentally enters the unit interior.

•The power cord gets excessively hot or its insulation is torn or stripped.

• (TIMER) indicator or (MONITOR) indicator on the indoor unit display blinks.

TEMPORARY SWITCH

TEMPORARY OPERATION

Press the temporary switch to start temporary operation if the remote controller cannot function due to dead batteries.

1	Disconnect the power supply.
	(Or turn off the circuit breaker.)

2	Reconnect the power supply.
	(Or turn on the circuit breaker.)
3	Automatic operation starts when the temporary switch
	is pressed.

• The air conditioner performs force-cooling operation if the temporary switch is pressed for at least 5 seconds. This operation is allowed to sales agents only. Users must not perform this operation.

TEMPORARY SWITCH

IF THE UNIT WOULD NOT BE USED FOR A LONG PERIOD OF TIME (MORE THAN 1 MONTH), PLEASE FOLLOW THE STEPS BELOW FOR MAINTENANCE

1	Dry the interior of
	the indoor unit.

2	Unplug the power	3	Remove the
	plug or turn off the		batteries from the
	circuit breaker.		remote controller.

•On a sunny day, perform stainless plasma air purifying (Fan) operation for approximately one half day. Mold can easily grow if air conditioner is not used for a long period of time while its inside is left wet.

– 44 –