Hitachi RAS-SX10HAK / RAC-SX10HAK Maintenance of Stainless Mesh Filter, Open the front panel

Maintenance of Stainless Mesh Filter

No daily maintenance is required. However, filter should be cleaned

if the dirt is noticeable due to the environment in which the air stainless mesh filter conditioner is used.

1	Stop the operation with the remote
	controller and unplug the power plug
	(or turn off the circuit breaker).
2 Open the front panel.
	(Refer to page 8 on opening the front panel)
3 Remove the front panel.
		Arm
	Push	1
	2
	Arm		1 Push the end of the right-side arm outward to
			release the tab.
			2 Move the left-side arm outward to release the
			left tab, and then pull the panel towards you.

4 Remove the front stainless mesh filter.

Filter locks

Hold this part to pull it out

• Slide the left and right stainless filter locks	• Slightly lift up the stainless mesh filter
towards the direction as illustrated.	and pull it out towards you.

РУССКИЙ ∂ÏÏËÓÈο PORTUGUÊS SPANISH ITALIANO FRANÇAIS DEUTSCH ENGLISH

– 35 –