Hitachi RAS-SX10HAK / RAC-SX10HAK Indoor Unit Control Panel / Cleaning Unit, English

INDOOR UNIT CONTROL PANEL / CLEANING UNIT

Open the front panel to operate. (How to open the front panel, page 8)

	Stainless Mesh Filter (inside)
Dust Catcher	Collects particulates and dusts in the air. (Page 35)
	Cleaning Unit
Collects the dust swept by
	Cleans the dust
the cleaning unit. (At front
	caught by the micro
and top.) (Page 37)
	mesh stainless filter.

ENGLISH

Dust Box
Collects and keeps the dust
that has been cleaned.
(Page 34)	Air Cleaning Mesh Box

How to Attach the Nano Titanium Air Cleaning Mesh

Preparation

Stop the air conditioner, and disconnect

the power supply (or turn off the circuit breaker).

1Open the front panel.

2Pull out the air cleaning mesh box as illustrated to remove it.

3Insert the air cleaning mesh into the slot as illustrated. Replace the air cleaning mesh box.

Air Cleaning Mesh Box

2

Nano Titanium Air Cleaning Mesh

Jaw

4● “Make sure that it clicks into place.”

●“If it dose not click into place, abnormal sounds may be heard or the box may fall off.”

5Close the front panel.

6Connect the power cord (or turn on the circuit breaker).

3

4

※With the air cleaning mesh used, the air-conditioning capability will fall slightly. Remove dust from the surface with a vacuum cleaner, and DO NOT clean it with water. (We recommend you clean it once every 6 months and replace it once every 2 years.)

– 5 –