Hitachi RAS-SX13HAK / RAC-SX13HAK Heating Operation, Dehumidifying Operation, Stop

HEATING OPERATION

Press the (HEAT) button to start heating operation.

Press the (HEAT) button.

•Adjust the room temperature and fan speed to your preference.

Temperature range between 16°C~32°C can be set.

STOP

Press the (STOP) button.

• A short beep sounds and heating operation stops.

DEHUMIDIFYING OPERATION

3 types of dehumidifying operations can be performed by pressing the (DEHUMIDIFY) button. Performs powerful dry operation without lower down the room temperature.

Press the (DEHUMIDIFY) button.

• Every time you press the (DEHUMIDIFY) button, the mode will change as shown in the chart below.

Auto	Quick	Condensation
Dehumidifying	Laundry	Control

(“AUTO” flashes for 5 seconds)

• In auto dehumidifying mode, fine adjustment of room temperature,humidity adjustment and fan speed selection can be made to your preference. Every time you press the ROOM TEMPERATURE button, the temperature will change by 1°C. (Temperature setting range is not higher or lower than 3°C.) Every time you press the HUMIDITY button, the humidity will change by 5%. (Humidity setting range is 40%~70%.)

• In quick laundry mode, fine adjustment of room temperature and fan speed selection can be made to your preference. (Fine adjustment of room temperature and humidity adjustment cannot be made in condensation control mode.)

STOP

Press the (STOP) button.

•A short beep sounds and dehumidifying operation stops.

•After the dehumidifying operation is stopped, the remote controller will display the

operation mode that had been set before the (DEHUMIDIFY) button was pressed.

– 14 –