Hitachi RAS-SX13HAK / RAC-SX13HAK Adjusting The Vertical Airflow Direction, Set automatically

Models: RAS-SX10HAK / RAC-SX10HAK RAS-SX13HAK / RAC-SX13HAK

1 96
Download 96 pages 56.33 Kb
Page 24
Image 24

ADJUSTING THE VERTICAL AIRFLOW DIRECTION

Please operate with the remote controller. (Moving by hands may cause malfunction.)

Cooling

Dehumidifying/

Heating

operation

Dry Cool operation

operation

About

About

About

15°

10°

50°

Set automatically

Air conditioner automatically set to the suitable angle for each operation (Horizontal air deflector only. The angle of the vertical air deflector is set to the front). Usually vertical airflow direction control is not required.

If room temperature and humidity continue to be high during cooling, dehumidifying or dry cool operation, the angle of horizontal air deflector may change to prevent dripping of condensed water.

Vertical airflow swing

When the (VERTICAL AIRFLOW) button is pressed, a short beep sounds and the vertical air deflector repeats swinging.

When the air conditioner stops operation, the swing of the vertical air deflector also stops and the air outlet closes.

If the operation resumes, the vertical air deflector is automatically set to the suitable angle for each operation.

Even if the swing mode is set, the vertical air deflector may stop swinging depending on the room temperature and humidity. (Page 25)

(It may take approximately 10 seconds for the air deflector to start moving. This is due to the checking operation to set the air deflector to the correct angle.)

Vertical air flow of your preference

Horizontal

Swing

About angle 60°

To set the vertical airflow direction to your desired angle, press the (VERTICAL AIRFLOW) button to move the vertical air deflector, and press the (VERTICAL AIRFLOW) button again to stop air deflector at your desired angle.

Press the (VERTICAL AIRFLOW) button.

A short beep sounds and the vertical air deflector repeats swinging. (Vertical airflow swing)

Press the (VERTICAL AIRFLOW) button again at your preferred angle.

The swing stops at the position where the button is pressed.

The air outlet closes if the operation stops. The horizontal air deflector will return to the preset position when the operation resumes.

If the operation mode is changed, the horizontal air deflector will automatically be set to the proper angle suitable for the newly set mode.

CAUTION

DO not operate long hours with cooling, dehumidifying, dry operation, airflow swing operation nor the vertical air deflector in downward state.

Some dew may form on the vertical air deflector and drop which may wet your furniture.

– 24 –

Page 24
Image 24
Hitachi RAS-SX13HAK / RAC-SX13HAK Adjusting The Vertical Airflow Direction, Set automatically, Vertical airflow swing