Hitachi RAS-SX13HAK / RAC-SX13HAK Maintenance of electric dust collector electrodes, both hands

MAINTENANCE (continued)

Maintenance of electric dust collector electrodes

1	Stop the operation with the remote controller
	and unplug the power supply (or turn off the
	circuit breaker).
2	Slowly open the vertical air deflectors using
	both hands.

CAUTION 2

•	Be sure to open slowly using both hands as shown		Horizontal air
	in the illustration.		deflectors
	Otherwise, it may cause malfunction.
•	Do not use excessive force to move the air deflector
	beyond the stopper located below it.		3
	Otherwise, it may cause malfunction.
3		Remove the dirt on the electric dust collector
		electrodes with a toothbrush.

•Be sure to use a dry toothbrush.

•Lightly brushed off the dust.

4 Turn on the power supply. (or turn on the circuit breaker)

Electric dust collector electrodes

CAUTION

•Do not touch the electric dust collector electrodes while the air conditioner is in operation High voltage generated at these parts could result in electrical shock.

•Do not splash or direct water to the electric dust collector electrodes It may cause short circuit or malfunction.

– 38 –