FURTHER CONVENIENT TIMER FUNCTION

Dehumidifying (Condensation control) operation and (ON TIMER) for heating operation can be set at the same time.

Dehumidifying (Condensation control) operation controls the condensation which may occur in the morning while (ON TIMER) for heating operation warms up the room by the time you wake up.

Combination of (ON TIMER) and (DEHUMIDIFY) button

Dehumidifying (Condensation control) operation and (ON TIMER) for heating operation for the next morning can be set in combination before you go to sleep.

„The display below is shown in the case where (ON TIMER) is set for heating operation and then dehumidifying operation (Condensation control) is executed at 11:38 p.m.

Preset the (ON TIMER).

When (ON TIMER) is set, the air conditioner starts operation so that the preset room temperature is

1 almost reached at the ON TIMER time. Check the settings of the air conditioners when you set the timer. (Page 26, 27)

Press the (DEHUMIDIFY) button. ( symbol is displayed)

The dehumidifying (Condensation control) operation stops at 1:38 a.m, two hours after the start of the

2 dehumidifying operation, and the heating operation starts in order to reach the preset temperature by 6:00 a.m.

– 28 –

Page 28
Image 28
Hitachi RAS-SX13HAK / RAC-SX13HAK Further Convenient Timer Function, Combination of ON TIMER and DEHUMIDIFY button