Hitachi RAS-SX10HAK / RAC-SX10HAK Adjusting The Horizontal Airflow Direction, English

ADJUSTING THE HORIZONTAL AIRFLOW DIRECTION

Adjust the horizontal airflow direction

•The angle of horizontal airflow direction is set to the front at the time of purchase.

•Every time the button is pressed, the mode of the horizontal air deflector changes as below.

• A short beep sounds and the angle of the horizontal air deflector changes.

Front
	Horizontal
		preferred angle
	swing

• The movements of the left and right air deflectors displayed in the remote controllers are not synchronous with movements of the actual air deflectors.

Horizontal angle of your preference

• To set the horizontal airflow direction to your desired angle, move the

horizontal air deflector and press the (HORIZONTAL AIRFLOW) button again to stop air deflector’s movement once it has reached your desired angle.

•The movement scope of the left/right air deflectors are set to the following

5 positions:

Press the (HORIZONTAL AIRFLOW) button again to fix your preferred angle during horizontal airflow swing.

•Fan speed may be increased depending on the angle of the horizontal air deflector.

•Even if the horizontal airflow direction has been adjusted to your desired angle, the angle of horizontal air deflector may change in the event the room temperature and humidity continue to be high during cooling, dehumidifying or dry cool operation. The angle will change back to your desired angle once the temperature and humidity have been lowered by the air conditioning operation.

CAUTION

Do not operate long hours with cooling, dehumidifying, dry cool operation and horizontal airflow swing operation.

Some dew may form on the horizontal air deflector and drop which may wet your furniture.

In the following cases, the swing stops even when vertical swing and horizontal swing are set.

In Heating operation	In Dehumidifying operation	In Dry Cool operation
• During preheat operation.	• When the humidity is reached	• When the temperature is below
• During defrost operation.	to the humidity which has been	the temperature which has been
• When the room temperature	set.	set and the operation is stop.
reaches the temperature which	• When the room temperature is
had been set.	below 1°C.

ENGLISH

– 25 –