Hitachi RAS-SX13HAK / RAC-SX13HAK, RAS-SX10HAK / RAC-SX10HAK Dry Cool Operation, Stop

DRY COOL OPERATION

When you operates cooling operation with the dry function, press the (DRY COOL) button, the air conditioner automatically sets temperature and humidity in dry cool mode.

Press the (DRY COOL) button.

•Adjust the room temperature and fan speed to your preference.

• Every time you press the (ROOM TEMPERATURE) button, the temperature will change by 1°C.

(Temperature setting range from the auto set temperature is not higher or lower than 3°C.)

STOP

Press the (STOP) button.

• A short beep sounds and dry cool operation stops.

Temperature	Based on the detected outside and room temperature,	• Even if the room temperature
	the temperature is set on an hourly basis within the range
to be set
	of 24~28°C.	reached the preset temperature,
		the air conditioner may continue
	50% when temperature above 27°C is set.
Humidity		to operate if the preset humidity
	55% when temperature of 26°C is set.
to be set		has not been reached.
	60% when temperature below 25°C is set.

•If you want to set the desired temperature and humidity during dry cool operation, we recommend you use the manual cooling operation. (Page 17)

The operation mode may automatically be switched to cooling or heating for temperature control.

If the room temperature is lower than the preset temperature, intermittent operation (repeat of operation state and stop state) is performed to avoid excessive lowering of temperature and to control the humidity.

Dry

Operation intermittent

stops operation

	Dry cool operation
About 1ºC		Approx. 3°C if outside temp. is
		below approx. 32°C.
		Approx. 1°C if outside temp. is
About 3ºC		above approx. 32°C.

Cooling

operation

Room temperature set Current room temperature

– 16 –