Hitachi RAS-SX13HAK / RAC-SX13HAK Installing Anti-Mold Wasabi Cassette, Open the front panel

INSTALLING ANTI-MOLD WASABI CASSETTE

1 Open the front panel.

•Do not hold the movable panel when opening and closing the

front panel.

Front panel

21

21

Gripping part

Gripping part

•Hold and lift up the front panel.

2

CAUTION

•Do not open the front panel during operation. It may interrupt the movable panel to work properly. Be sure to stop the operation first before opening the front panel.

4 31 Panel support

•Push up the panel support until it clicks to lock it.

Lower the front panel and fix in position with the panel support.

2 Install the anti-mold wasabi cassette.

• Remove the dust box housing	• Take out the anti-mold wasabi
Dust Box Housing	cassette from the aluminium bag.

Handle

Dust Box Housing

●食べられません。	●「防カビわさびカセット」の表面のアルミシートを 意 はがしたり、破ったり、穴をあけたりしないでください。 「防カビわさびカセット」の効果がなくなります。	●開封時は顔を近づけないでください。 わさびの香り成分で、目や鼻に刺激を感じることがあります。	●製品の取扱説明書を確認して確実に取り付けてください。	この中に「防カビわさびカセット」が入っています
	注

Anti-mold wasabi cassette

Aluminium bag

•Slide the anti-mold wasabi cassette that has been taken out of the wrapper directly into the Dust Box Housing.

Do not remove or tear the aluminium sheet on the surface nor make a hole on it.

CAUTION

•Do not put your face close to the package when you open it.

Your eyes or nose may be irritated by wasabi aroma.

•Do NOT eat.

No daily maintenance is required. However, the effectiveness of anti-mold wasabi cassette will be lost after approximately 10 years have elapsed. Replace the anti-mold wasabi cassette in such event.

– 8 –