Hitachi RAS-SX13HAK / RAC-SX13HAK NAMES AND FUNCTIONS OF EACH PART continued, Remote Controller

NAMES AND FUNCTIONS OF EACH PART (continued)

REMOTE CONTROLLER

Transmits the operation and timer settings to the indoor unit.

The LCD shown in the illustration below is the display immediately after the reset switch is pressed. Usually not all the data are displayed. On the LCD shown below, the functions not available for this room air conditioner are also displayed.

BUTTONS TO	Transmission Part
START OPERATIONS
DEHUMIDIFY Button		Transmission Indicator
		The transmission indicator
Press this button to start
		lit when a signal is sent.
dehumidifying operation.
		STOP Button
(Page 14)
HEAT Button		Press this button to stop any
		operation except the preset timer.
Press this button to start
heating operation.		ROOM TEMPERATURE
(Page 14)
		Button
COOL Button		Press this button to set the
Press this button to start		room temperature. Keep
cooling operation.		pressing and the value will
(Page 15)		change more quickly.
DRY COOL Button		HUMIDITY Button
		Press this button to set the
Press this button to start dry
		humidity for dehumidify and
cool operation. (Page 16)
		dry cool operations.
AUTO Button
Press this button to		INFRARED HUMAN-PRESENCE
start automatic operation.
		SENSING Button
(Page 13)
		Press this button to enter
		the dynamic air deflection mode.
		(Page 19, 20)
	AIR CLEANING Button	SLEEP TIMER Operation Button
	Press this button to start plasma air
		Press this button to start sleep timer
	cleaning (air circulation) operation.
		operation. (Page 29)
	(Page 18)

Remote controller can be used when it is fixed on a wall or pillar using the remote controller holder.

Before fixing it, make sure the indoor unit can be controlled from the remote controller fixing point.

Screw

– 6 –