Hitachi RAS-SX10HAK / RAC-SX10HAK Automatic Operation, Stop, Adjust the room temperature

Models: RAS-SX10HAK / RAC-SX10HAK RAS-SX13HAK / RAC-SX13HAK

1 96
Download 96 pages 56.33 Kb
Page 13
Image 13

AUTOMATIC OPERATION

Based on the room temperature and outside temperature, the unit determines the most suitable operation mode (heating, dehumidifying or cooling) and a comfortable temperature. (Set the current time on the remote controller before starting operation.)

Press the (AUTOMATIC OPERATION) button to set the operation mode to auto.

1

Every time you press it, the mode will change as

shown in the chart on the right.

2

Press the

 

 

 

 

(STOP) button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the

(STOP) button again.

 

 

STOP

A short beep sounds and the automatic

TEMPORARY

 

SWITCH

 

 

operation stops.

 

 

 

Operation mode will be displayed on the

 

 

 

remote controller display.

 

AUTOMATIC OPERATION

 

 

 

Heating

Performs heating operation when the room temperature is below 23°C.

 

Set the temperature to be around 23°C.

 

 

 

 

Performs dehumidifying operation when the room temperature is 23~26°C.

Dehumidifying

The preset temperature will be the room temperature at the time of start of air conditioner

 

operation.

 

 

Cooling

Performs cooling operation when the room temperature is above 27°C.

Set the temperature to be around 27°C.

 

Even if dehumidifying operation is set, the air conditioner may not execute dehumidifying if the room humidity is not very high. This is not a malfunction.

Room temperature and fan speed can be adjusted to your preference.

 

Adjust the room temperature

Increase

 

 

 

 

Press the

(ROOM TEMPERATURE)

Decrease

1

button.

 

Every time you press it, a short beep sounds and the

temperature will change by 1°C.

 

is displayed if the temperature is set higher than the automatically set room temperature by 1°C.

is displayed if the temperature is set lower than the automatically set room temperature by 1°C.

The adjustable temperature range is not higher or lower than 3°C of the automatically set room temperature.

Humidity setting cannot be adjusted.

Select the fan speed

2

Press the

(FAN SPEED) button.

“AUTO”, “LOW” and “SILENT”

can be selected.

Every time you press it, the mode will change as shown in the chart on the right.

ENGLISH

– 13 –

Page 13
Image 13
Hitachi RAS-SX10HAK / RAC-SX10HAK Automatic Operation, Stop, Adjust the room temperature, Select the fan speed