Panasonic PT-D10000U, DW10000U manual RGB2 input

	Model No.		PT-D10000U		PT-DW10000U
			1 set of high-density, D-sub 15p (female)
			[For YPBPR input]
			Y: 1.0 V [p-p] synchronization signal included, PBPR: 0.7 V [p-p] 75 Ω
		RGB2 input	[For RGB input]
		terminal	0.7 V [p-p] 75 Ω For G-SYNC: 1.0 V [p-p] 75 Ω
			HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
			VD: TTL, high-impedance, positive/negative polarity automatically adjusted
			• HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC.
		Video input/		1 set BNC
		output terminal	1.0 V [p-p] 75 Ω (Active through for Video output)
		S-video input		1 set Mini DIN 4p
Interface		terminal	Y 1.0 V [p-p] C 0.286 V [p-p] 75 Ω Compliant with S1 signals
				1 set
ports		DVI-D input
				DVI 1.0 compliant
		terminal
			HDCP (Single link only) compatible
			1 set (Used for network connection)
		LAN terminal		10BASE-T/100BASE-TX
				PJLink™ compatible
		Serial input/	D-sub 9-pin (female/male), RS-232C compliant
		output terminal	Used for personal computer control
		Remote1 input/		1 set each for M3 pin jack
		output terminal	Wired remote control, used for link control
		Remote2 terminal		D-sub 9p (female)
				Used for external control
Length of power supply cord				3.0 m (9.1´)
Cabinet				Molded resin
Outside dimensions			Width: 578 mm (22.8˝), Height : 320 mm (12.6˝), Depth: 643 mm (25.3˝)
Working environment				32 kg (71 lb) (without lens)
condition
Working environment			Ambient temperature*3 : 0 °C to 45 °C
condition			Ambient humidity: 10 % to 80 % (no condensation)
		Power source		3 V DC (two AA dry cells)
Remote		Operation range	approx. 30 m (98´5˝) (in front of beam receiver)
		Mass	134 g (0.31 lb) (including dry cells)
control
		Outside	Width: 51 mm (2˝), Thickness: 23 mm (0.9˝), Depth: 176 mm (6.9˝)
		dimensions
			Hanging attachment (For high ceiling): ET-PKD100H
			Hanging attachment (For low ceiling): ET-PKD100S
			Projection lens:	ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4,
				ET-D75LE5, ET-D75LE6, ET-D75LE8
	Option		DVI-D input module:	ET-MD77DV
			SD-SDI input module:	ET-MD77SD1
			HD/SD-SDI input module:	ET-MD77SD3
			Replacement Lamp Unit:	ET-LAD10000 (single bulb),
				ET-LAD1000F (4 bulbs)

*1 Interlace signals are not supported even when the EDID2 mode is selected.

*2 70˝ – 300˝ for ET-D75LE5

*3 If using the projector at high altitudes (1 400 m (4605.3´) - 2 700 m (8881.5´)), the ambient operating temperature should be 0°-40°C.

Information

ENGLISH – 117