Panasonic DW10000U, PT-D10000U manual Gamma setting, Sharpness setting, Press to select Gamma

Adjusting the picture (continued)

8. Press ◄► to adjust the level. 2. Press ◄► to switch “GAMMA”.

Item	Operation	Adjustment	Adjustment
			range
	Press ► button.	Deepens
R		red.	Maximum
		Weakens	value
	Press ◄ button.
		red.	HIGH : 255
			LOW : 127
	Press ► button.	Deepens
G		green.	Minimum value
	Press ◄ button.	Weakens	HIGH : 0
			LOW : -127
		green.
	Press ► button.	Deepens	Default
B		blue.	HIGH : 255
			LOW : 0
		Weakens
	Press ◄ button.
		blue.

Note

•All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press DEFAULT to return the setting for the selected item only to the factory default setting.

•The color temperature cannot be adjusted for the internal test pattern (p. 83). Be sure to project the input signal when adjusting the color temperature.

Gamma setting

•The setting will change as follows each time ◄► is pressed.

DEFAULT USER1 USER2

2.5 2.2

Note

•Separate software is required to select “USER1” and “USER2”. Consult your dealer.

•“DEFAULT” cannot be selected when the picture mode has been set to “USER”.

Sharpness setting

This adjusts the sharpness of the pictures.

1.Press ▲▼ to select “SHARPNESS”.

PICTURE

PICTURE MODE	NATURAL
CONTRAST	0
BRIGHTNESS	0
COLOR	10
TINT	1
COLOR TEMP.	DEFAULT
GAMMA	DEFAULT
SHARPNESS	0
NOISE REDUCTION	OFF
DYNAMIC IRIS	OFF
SYSTEM SELECTOR	AUTO 1

MENU SELECT

CHANGE

This switches the gamma mode.

1. Press ▲▼ to select “GAMMA”.

PICTURE

PICTURE MODE	NATURAL
CONTRAST	0
BRIGHTNESS	0
COLOR	10
TINT	1
COLOR TEMP.	DEFAULT
GAMMA	DEFAULT
SHARPNESS	0
NOISE REDUCTION	OFF
DYNAMIC IRIS	OFF
SYSTEM SELECTOR	AUTO 1

MENU SELECT

CHANGE

3. Press ◄► to adjust the level.

Operation	Adjustment	Adjustment range
Press ►	Contours become
button.	sharper.
		0 to 15
Press ◄	Contours become
button.	softer.

Note

•The possible setting range will vary depending on the input signal.

52 – ENGLISH