Onkyo PR-SC5508 instruction manual Picture Adjust

Picture Adjust

Using “Picture Adjust”, you can adjust the picture qual- ity and reduce any noise appearing on the screen.

To view the TV picture while setting, press ENTER. To return to the previous screen, press RETURN.

■Game Mode

`Off:

Game Mode off.

`On:

Game Mode on.

If video signal delay occurs during playback on a video component (i.e. game console), select the corresponding input source and set the “Game Mode” setting to “On”. The delay will decrease but in return the picture quality will become poor.

■Wide Mode*1*5

This setting determines the aspect ratio.

`4:3:

`Full:

`Zoom:

`Wide Zoom:

`Smart Zoom:

En

■Picture Mode*1

`Custom:

All settings can be performed manually.

`ISF Day:

Setting when a room is bright.

`ISF Night:

Setting when a room is dark.

`Cinema:

Selected when the picture source is movie film, etc.

`Game:

Selected when the picture source is game console.

`Through:

Default values are adapted for all settings.

With “Picture Mode”, you can change the following set- tings to be suitable for the movie or game screen by one operation; “Film Mode”, “Edge Enhancement”, “Mos- quito NR”, “Random NR”, “Block NR”, “Resolution”, “Brightness”, “Contrast”, “Hue”, “Saturation”, “Gamma”, “Red Brightness”, “Red Contrast”, “Green Brightness”, “Green Contrast”, “Blue Brightness”, “Blue Contrast”.

The receiver has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from the receiver. Accordingly, Onkyo recommends that setup and calibration be per- formed by an ISF Certified installation technician.

■Film Mode*2*4*6

`Auto:

Adjusts to the picture source, automatically selecting “Film Mode”.

`Video:

Selected when the picture source is video, etc.

`Film:

Selected when the picture source is movie film, etc. DVD-Video disc content originates from either film (recorded at 24 frames per second) or video intended for TV (recorded at 30 frames per second). With the default “Film Mode” setting of “Auto”, the AV controller auto- matically detects the type of content and processes it accordingly to achieve the best picture quality. If the AV controller detects the type of content incorrectly due to characteristics of the disc, you can select “Video” or “Film” manually.

■Edge Enhancement*2*4*7

`Off:

Edge enhancement off.

`Low:

Low edge enhancement.

`Mid:

Medium edge enhancement.

`High:

High edge enhancement.

With Edge Enhancement, you can make the picture appear sharper.

56