Panasonic PT-D10000U, DW10000U manual Option2 settings, Setting a projector ID, Press Menu twice

Option2 settings

MENU

▲▼◄►

ENTER

DEFAULT

This menu can be used to make a variety of picture and projector settings.

MENU	Press to display the
	MAIN MENU screen.

Press to select “OPTION2”.

Press to display the “OPTION2” menu.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

OPTION1

OPTION2

TEST PATTERN

SIGNAL LIST

NETWORK

SECURITY

MENU SELECT

ENTER SUB MENU

Setting a projector ID

The projector has an ID number setting function that helps the user to control two or more projectors either simultaneously or separately with a single remote control. The ID number is set to “ALL” by default.

Hence the ID number need not be set when only one projector is used.

1.Press ▲▼ to select “PROJECTOR ID”.

OPTION2

PROJECTOR ID	2
INSTALLATION	FRONT-F
ALTITUDE	LOW
DIRECTION	H
LAMP SELECT	QUAD
LAMP RELAY	OFF
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO	LOGO1
PASSWORD

MENU SELECT

CHANGE

2.Press ◄► to switch “PROJECTOR ID”.

•The setting will change as follows each time ◄► is pressed.

ALL 1

64 2

3.Press MENU twice.

•This concludes the setting procedure and the on-screen indications disappear and the normal screen appears again.

Note

•The ID number can be set to “ALL”, or selected from “1” to “64”.

•If the projectors are given ID numbers, their remote controls must be assigned the same ID numbers, respectively.

•If the ID number of a projector is set to “ALL”, it can be controlled by the remote control or the PC with any ID number.

If multiple projectors are used and some of them have their IDs set to “ALL”, they cannot be controlled separately from the projectors with other ID numbers. For details on remote control ID setting, see page 18.

Special Features

ENGLISH – 75