Using LCM to Manage the FN10
To display the current baud rate setting, at the LCM prompt:
1.Type baud
LCM responds:
Usage: baud [120024004800960019200]
Baud rate is 4800.
To change the baud rate setting, at the LCM prompt:
1.Type baud <baud rate>
For example, baud 9600 would set the baud rate to 9600. LCM responds:
Baud rate is 9600.
4.5.6 Setting a Reboot Time
You can enter the number of seconds the FN10 waits before rebooting. At the LCM prompt:
1.Type reboot <time interval>
For example, reboot 60
LCM responds:
System will be reset in 60 seconds.
Fast Network 10 User Guide | Page |
