Enterasys Networks Fast Network 10 manual Disabling Bridging, Displaying Bridging Functions

Chapter 3: Configuring Your FN10

3.3 DISABLING BRIDGING

To turn off the bridging function for a port or port range, at the LCM prompt:

1.Type bridge [PORT-RANGE] off

For example, bridge 2 off would disable bridging on port 2.

LCM responds:

Port 2 bridging: off

3.4 DISPLAYING BRIDGING FUNCTIONS

To display the bridging functions that are enabled for all ports, at the LCM prompt:

1.Type bridge

LCM responds with a list of all ports and the bridging function that is enabled. For example, typing bridge would display the bridging status for all ports.

Usage: bridge [PORT-RANGE [{offonnoBPDU{]]

Port 1 bridging: Transparent Bridging

Port 2 bridging: Transparent Bridging

Port 3 bridging: Transparent Bridging

Port 4 bridging: Transparent Bridging

.

.

.

Port 24 bridging: off

You could also type bridge [PORT-RANGE]to look at a specific range of ports. For example bridge 2-4would display bridging functions for ports 2, 3, and 4.

Page 3-6 Fast Network 10 User Guide