FN10 Statistics
For each of the above categories, statistics on whether a packet was forwarded or filtered are available. In addition, if a packet was filtered, the following conditions are recorded:
-If the packet is local traffic
-If the port is not in the Spanning Tree Forwarding state
-If there is a source address or entry port restriction
-If there is a destination address or exit port restriction
•The number of bytes in the received packets.
•The number of bytes in the packets that were filtered.
•The number of bytes in the packets that were forwarded.
•The total number of packets transmitted to the LAN.
The packets are broken down into the following categories by type of destination address:
-Known individual destination address
-Unknown individual destination address
-Multicast address (other than broadcast)
-Broadcast address
-Individual node management packets
-Multicast node management packets (other than broadcast)
-Broadcast node management packets
•The number of bytes in the transmitted packets.
•The number of packets not transmitted to the LAN.
The packets are broken down into the following categories:
-Not sent due to congestion
-Not sent due to multicast storm protection
•The number of received Frame Check Sequence (FCS) errors detected.
•The number of missed packets due to receive queue overflows.
Fast Network 10 User Guide | Page |
