Enterasys Networks Fast Network 10 manual Chapter Unpacking and Installing Your FN10, FN10 Panels

CHAPTER 2

UNPACKING AND INSTALLING

YOUR FN10

Carefully unpack the FN10 from the shipping carton and inspect it for possible damage. If any damage is evident, contact your supplier. The shipping carton contains the following:

•The FN10 unit

•One AC power cord

•Console Cable kit

•Two rack-mounting brackets with fasteners (for rack-mount installation)

•Four stick-on feet (for desktop installation)

•Documentation – In addition to this manual, the Fast Network 10 Quick Setup card, the Fast Network 10 Local Console Manager (LCM) Commands Reference Card, the Fast Network 10 MIB Reference Guide, and Release Notes are also included.

2.1 FN10 PANELS

The FN10 provides 12 or 24 10BASE-T Ethernet ports, including one Ethernet Attachment Unit Interface (AUI) connection. Each FN10 also includes an RS232C port for out-of-band management, and can be configured with two additional Fast Ethernet (100 Mbps) ports.

Figure 2-1 shows the FN10’s front and rear panels. The LEDs and buttons are described in Tables 2-1 and 2-2.

Fast Network 10 User Guide Page 2-1