Enterasys Networks Fast Network 10 manual 3 FN10 Has Rebooted, 4 FN10 Does Not Respond to NMS

Chapter 6: FN10 Diagnostics and Troubleshooting

6.5.3 FN10 Has Rebooted

•Use the LCM ident command to check the FN10 diagnostic codes, and call your authorized Cabletron Systems representative.

6.5.4 FN10 Does Not Respond to NMS

•Check the port status using LCM.

•Check to see if the Spanning Tree topology is stable using LCM.

•Check that a pathway to the FN10 exists.

•Verify the FN10’s IP address using LCM.

Page 6-8 Fast Network 10 User Guide