Chapter 6: FN10 Diagnostics and Troubleshooting
| Table |
|
|
LED | Meaning |
|
|
Link (upper level | On – Indicates the link is good. |
of port LEDs) | Off – Indicates there is no link. |
|
|
Status (lower | On/Blinking – Indicates you are monitoring the port for |
level of port | a selected segment status condition. |
LEDs) | Off – Indicates you are not monitoring the port. |
|
|
Segment Status |
|
TX | On – Indicates you are monitoring Transmit (TX) |
| activity on all ports. |
RX | On – Indicates you are monitoring Receive (RX) activity |
| on all ports. |
Act | On – Indicates you are monitoring Transmit (TX) and |
| Receive (RX) activity on all ports. |
Col | On – Indicates you are monitoring packet collision on a |
| all ports. |
Usr | On – Indicates you are monitoring transmission and |
| receive errors on all ports. |
|
|
Ready | On – Indicates the FN10 is operational. |
| Blinking – Indicates the FN10 is running |
| diagnostics. |
| Off – Indicates the FN10 is |
|
|
Pwr | On – Indicates the FN10 is receiving power and the |
| voltage is within the acceptable range. |
| Off – Indicates the FN10 is not receiving power. |
|
|
If the Ready LED continues to blink after
!are complete, it could mean the FN10 is overheating.
CAUTION
Table 6-2 describes the FN10 buttons.
Page | Fast Network 10 User Guide |
