Using LCM to Check FN10 Status
•Address display
•Ipaddr
•Ident
These LCM commands are described in the sections that follow.
4.3.1 Displaying Status
The status command displays the status of the FN10 and automatically pages through the status of all of the Ethernet ports, pausing at each screen of information.
NOTE |
You can also use the status command to display status for individual Ethernet ports by typing status and specifying a port number.
At the LCM prompt:
1.Type status
LCM displays the following type of information.
Fast Network 10 User Guide | Page |
