Enterasys Networks Fast Network 10 manual To display all MAC addresses, at the LCM prompt

Chapter 4: Monitoring and Managing Your FN10

To display all MAC addresses, at the LCM prompt:

1.Type addresses display any

LCM responds with a list of all MAC addresses, their associated ports, the type, age, and number of frames from and to that address.

Address	Type	Port	Age(secs)	Frames-From	Frames-To
08:00:20:02:3a:44	Learned	3	26	1	0
00:40:27:03:b7:21	Static	**	5	17110	195

Enter <CR> to continue, Ctrl-C to exit:

If you do not specify any, only the learned static and other addresses are displayed.

To display a specific address, at the LCM prompt:

1.Type addresses display <MAC-ADDRESS>

For example, if you typed, addresses display 02:04:06:03:2a:43, LCM would display the following information:

Address	Type	Port	Age(secs)	Frames-From	Frames-To
02:04:06:03:2a:43	Learned	5	21	1181	73

You can display a range of addresses by using a net mask. This is helpful when determining the status associated with stations containing the same make of Ethernet network interface cards. At the LCM prompt:

1.Type addresses display <MAC-ADDRESS> <NET-MASK>

For example, to see all addresses that begin with 02:04:06, you would enter:

addresses display 02:04:06:00:00:00 ff:ff:ff:00:00:00

Page 4-12 Fast Network 10 User Guide