10. Using the Wi-Fi/NFC Function
260
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1Start “Image App”. (P258)
2Select [QR code], and then select [OK].
3Using “Image App”, scan the QR code displayed
on the screen of the camera.
If you press [MENU/SET] on the ca mera, the QR
code will be enlarged. When it is difficult to scan
the QR code, try enlarging it.
4Install the profile of “IMAGE APP”.
A message will be displayed on the browser.
If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5Press the home button to close the browser.
6Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
7Select the SSID displayed on the
screen of the camera.
8Return to the home screen, and then start “Image
App”. (P258)
The connection method differs according to your smartphone/tablet.
IMAGE APP
Panasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC