10.Using the Wi-Fi/NFC Function

Changing the connection method

To change the connection method, press [DISP.], and then select the connection method.

When connecting with [Via Network]:

On the camera

1Select [Via Network].

Follow the connection procedure described on P293 to connect the camera to a wireless access point.

(On your smartphone)

2Turn on the Wi-Fi function.

3Connect the smartphone/tablet to the wireless access point to which the camera is connected.

4Start “Image App”. (P258)

When connecting with [WPS Connection]¢ in [Direct]:

On the camera

1Select [Direct].

Follow the connection procedure described on P296 to connect the camera to the smartphone.

(On your smartphone)

2Start “Image App”. (P258)

¢WPS is a function that allows you to easily set up a connection with a wireless LAN device and make security-related settings. To check whether your smartphone supports the function, refer to the operating instructions of the smartphone.

Terminating the connection

After use, terminate the connection to the smartphone.

1Press [Wi-Fi] on the camera. (P256)

2On the smartphone, close “Image App”.

If you are using an iOS device

On the screen of “Image App”, press the home button to close the app.

If you are using an Android device

On the screen of “Image App”, press the return button twice to close the app.

262

Page 262
Image 262
Panasonic DMCGH4KBODY, DMCGH4YAGH owner manual 262, Changing the connection method, On your smartphone Start Image App. P258