Panasonic DMCGH4KBODY, DMCGH4YAGH owner manual 256, Describing method

10.Using the Wi-Fi/NFC Function

What you can do with the [Wi-Fi] button when connected to Wi-Fi

•Following items can be selected.

[Terminate the Connection]	Terminates the Wi-Fi connection.
[Change the Destination]	Terminates the Wi-Fi connection, and allows you to
	select a different Wi-Fi connection.
[Change Settings for Sending	Refer to P301 for details.
Images]¢
[Register the Current Destination	Registering the current connection destination or the
	connection method, you can easily connect with the
to Favorite]	same connection method next time.
[Network Address]	Displays the MAC address and IP address of this unit.

¢This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or [Send Images Stored in the Camera] is set to [Printer].

∫Describing method

When “select [Select a destination from History]”, etc. is described in a step, perform any of the following operations.

Button operation: Select [Select a destination from History] with the cursor button, and then press [MENU/SET].

Touch operation: Touch [Select a destination from History].

•The camera cannot be used to connect to a public wireless LAN connection.

•Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point.

•It is recommended to use a fully charged battery when sending images.

•When the battery indicator is flashing red, the connection with other equipment may not start or the connection may be disrupted.

(A message such as [Communication error] is displayed.)

•When sending images on a mobile network, high packet communication fees may be incurred depending on the details of your contract.

•Pictures may not be completely sent depending on radio wave conditions. If the connection is terminated while sending pictures, pictures with missing sections may be sent.

•Do not remove the memory card or battery or move to an area without any reception while sending images.

•The monitor display may become distorted for an instant while connected to the service, however this will not affect the image being sent.

•If you use the HDMI output during recording with [Bit Mode] in [HDMI Rec Output] set to [4:2:2 10bit], the Wi-Fi function will be disabled.

256