Panasonic DMCGH4KBODY, DMCGH4YAGH owner manual 404, Images cannot be transmitted to the web service

13.Others

The PC is not recognized when I use a Wi-Fi connection. The camera cannot be connected to PC via Wi-Fi connection.

•The default workgroup name is set to “WORKGROUP”. If you changed the workgroup name, the PC will not be recognized.

In [Change Workgroup Name] in [PC Connection] of the [Wi-Fi Setup] menu, change the workgroup name to that of the PC you are connecting to. Refer to P302 for details.

•Please confirm login name and password are correctly typed.

•When the system time of Mac computer or Windows PC connected to a camera differs severely from that of the camera, the camera cannot be connected to the computer or PC in some OSs.

>Please confirm [Clock Set] and [World Time] of the camera matches with time, date and time zone in Windows PC or Mac computer. When both settings do not match severely, please match them.

Images cannot be transmitted to the web service.

•Confirm that the login information (login ID/user name/email address/password) is correct.

•Web service server or the network may be busy.

>Try again after a while.

>Check the site of the web service you are sending the image to.

It takes time to transmit an image to the web service.

•Is the size of the image too large?

>Reduce the image size at [Size] (P301), and then send.

>Transmit after dividing the motion picture with [Video Divide] (P242).

•It may take longer time to transmit when distance to the wireless access point is far.

>Transmit closer to the wireless access point.

The image that was supposed to have uploaded to the web service is not there.

•Upload may not complete when it is disconnected while transmitting the image.

•It may take some time after uploading the image to be reflected in the web service depending on the status of the server.

>Wait for a while and try again.

•You can check the transmission status on the web service link settings by logging into “LUMIX CLUB”.

404