Panasonic DMCGH4YAGH 263, Connecting to a smartphone/tablet by using the NFC function, Camera

10.Using the Wi-Fi/NFC Function

Connecting to a smartphone/tablet by using the NFC function

Using the NFC “Near Field Communication” function, you can easily transfer data necessary for a Wi-Fi connection between this camera and the smartphone/tablet.

∫Compatible models

This function can be used with the NFC compatible device with Android (OS version 2.3.3 or higher). (excluding some models)

Preparation:

(On the camera)	(On your smartphone/tablet)
• Set [NFC Operation] to [ON]. (P302)	• Check that your smartphone/tablet is a
	compatible model.
	• Turn on the Wi-Fi function.
	• Install the “Image App” in advance. (P258)

1Launch “Image App” on your smartphone/tablet.

2	While [ ] is displayed on the screen of
	the smartphone, touch the smartphone to
3	[ ] of the camera.
	When the connection confirmation screen
4	is displayed on the camera, select [Yes].
	Touch the smartphone to [ ] of the

camera again.

•Steps 3 through 4 are not required from the

second time on.

•It may take time to complete the connection.

•When the smartphone has connected, an image

of this camera will be displayed on the smartphone.

• The connected smartphone is registered to this camera.

•If a connection attempt by touching fails, restart

the “Image App”, and then display the screen in step 1 again.

•If a connection is established during single picture playback, the picture will be transferred to the smartphone. (P266)

263