Panasonic DMCGH4YAGH, DMCGH4KBODY owner manual Entering Text, Rec Profile Setup SET Baby1 Name SET

2.Getting Started/Basic Operations

Entering Text

It is possible to enter babies’ and pets’ names and the locations when recording.

When a screen that looks like the one on the right is displayed, you can enter characters.

(Only alphabetical characters and symbols can be entered.)

•Example of operation for displaying a screen:

> [Rec] > [Profile Setup] > [SET] >

[Baby1] > [Name] > [SET]

1 Press 3/4/2/1 to select text and then press [MENU/SET] to register.

•Move the cursor to [ ] and then press [MENU/SET] to switch text between [A] (capitals), [a] (lower case), [1] (numbers) and [&] (special characters).

•To enter the same character again, rotate the control dial right to move the cursor.

•The following operations can be performed by moving the cursor to the item and pressing [MENU/SET]:

–[]]: Enter a blank

–[Delete]: Delete a character

–[ ]: Move the entry position cursor to the left

–[ ]: Move the entry position cursor to the right

•A maximum of 30 characters can be entered.

(Maximum of 9 characters when setting names in [Face Recog.])

• A maximum of 15 characters can be entered for [], [ ], [ ], [ ] and [ ]. (Maximum of 6 characters when setting names in [Face Recog.])

2 Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/SET] to end text input.

•Text can be scrolled if all of the entered text does not fit on the screen.

57