4.Focus and Shutter (Drive Mode) Settings

Setting up position of the AF area/changing size of the AF area

Applicable modes:

When [š], [ ], [Ø], or [ ] in Auto Focus Mode is selected, you can change the position and size of the AF area.

Perform the operation after canceling the touch shutter function.

When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to [AF].

The spot metering target can also be moved to match the AF area when the [Metering Mode]

(P161) is set to [ ]. At the edge of the screen, the metering may be affected by the brightness around the AF area.

If you set [Direct Focus Area] in the [Custom] menu to [ON], you can move the AF area with the

cursor buttons when [š], [ ], or [Ø] is selected, and you can move the enlarged part with the cursor buttons when [ ] is selected. (P307)

Not available in these cases:

When using digital zoom, the position and size of the AF area cannot be changed.

When selecting [š], [Ø]

Position and size of the AF area can be changed.

1Press [ ].

2Select [š] or [Ø] and press 4.

AF area setting screen is displayed.

You can also display the AF area setting screen by

touching the screen.

3 Change the position and size of the AF area.

Button

Touch

Description of operation

operation

operation

 

3/4/2/1

Touching

Moves the AF area.

 

Pinching in/

Enlarges/reduces the AF

 

out

area in small steps.

/

s

Enlarges/reduces the AF

area in large steps.

 

 

 

 

Resets the AF area back to

 

 

the center.

[DISP.]

[Reset]

If you press the button

 

 

again, the frame size will be

reset to the default setting.

If you set the AF area over an eye in the yellow frame when [š] is selected, the eye to be in focus will be changed. (P97)

101

Page 101
Image 101
Panasonic DMCGH4YAGH, DMCGH4KBODY owner manual 101, When selecting š, Ø, Position and size of the AF area can be changed