Panasonic DMCGH4KBODY, DMCGH4YAGH 396, Motion pictures, Bright spot not in subject is recorded

13.Others

The brightness or the hue of the recorded picture is different from the actual scene.

•When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed may introduce slight changes to brightness and color. These are a result of the characteristics of the light source and do not indicate a malfunction.

•When recording subjects in extremely bright locations or recording under fluorescent lighting, LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may change or horizontal striping may appear on the screen.

Bright spot not in subject is recorded.

•There may be defective pixels in the image sensor.

>Perform [Pixel Refresh] (P68).

Subject cannot be locked. (AF tracking not possible)

•Set the AF area to the distinctive color of the subject if there is a part that is different from the surrounding color. (P98)

Operation sound is small.

•Is your finger covering up the speaker? (P19)

Motion pictures

Recording motion pictures is not possible.

•If you continue to use the same card after changing [System Frequency] (P220), motion pictures may not be recorded. To record with the same card, reset [System Frequency] to the original setting. To record motion pictures with the current setting, try the following:

–Perform formatting (P68) on this unit after saving necessary data on a PC, etc.

–Insert a different card.

•You may not be able to record for a short while after turning this unit on when using a large capacity card.

396