285
10. Using the Wi-Fi/NFC Function
1Select the menu.
2Select [Via Network], and connect. (P292)
3Check the send setting.
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P301)
4Take pictures.
To change the setting or disconnect, press [Wi-Fi]. (P256)
You cannot change the settings while sending pictures. Wait until sending is complete.
1Select the menu.
2Select [Via Network], and connect. (P292)
3Check the send setting.
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P301)
4Select [Single Select] or [Multi Select].
To change the setting or disconnect, press [Wi-Fi]. (P256)
Sending an image each time a recording is made ([Send Images While
Recording])
>[New Connection] > [Send Images While Recording] > [Cloud
Sync. Service]
Select and send the images ([Send Images Stored in the Camera])
>[New Connection] > [Send Images Stored in the Camera] >
[Cloud Sync. Service]
[Single Select] setting
1Select the picture.
2Select [Set].
[Multi Select] setting
1Select the picture. (repeat)
The setting is canceled when the picture is selected
again.
2Select [OK].
The number of pictures that can be sent by [Multi
Select] is limited.
Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
Wi-Fi
6HW
2.