10.Using the Wi-Fi/NFC Function

Displaying pictures on a TV

You can display pictures on a TV that supports the Digital Media Renderer (DMR) function of the DLNA standard.

If you display pictures using the Wi-Fi function, they cannot be output in 4K resolution. To output them in 4K resolution, connect the camera and the TV with an HDMI micro cable. (P325)

Preparations:

Set the TV to DLNA waiting mode.

Read the operating instructions for your TV.

1Select the menu.

> [New Connection] > [Playback on TV]

2Select [Via Network] or [Direct], and connect. (P292)

3Select a device you want to connect.

When the connection is established, the screen is displayed.

4Take or play back pictures on this unit.

To change the setting or disconnect, press [Wi-Fi]. (P256)

When a TV is connected to this unit, the TV screen may temporarily return to the status before the connection. Pictures are displayed again when you take or play back pictures.

[Effect] and [Sound] of the Slide Show are disabled.

Not available in these cases:

Motion pictures cannot be played back.

During the multi/calendar playback, pictures displayed on the screen of this unit are not displayed on TV.

272

Page 272
Image 272
Panasonic DMCGH4KBODY, DMCGH4YAGH Displaying pictures on a TV, 272, Preparations Set the TV to Dlna waiting mode