103
4. Focus and Shutter (Drive Mode) Settings
You can set the focus position precisely by enlarging the screen.
•The focus position cannot be set at the edge of the screen.
1Press [].
2Select [ ] and press 4.
3Press 3/4/2/1 to set the focus position and then
press [MENU/SET].
•The assist screen for setting the focus position is displayed
in an enlarged size.
•The assist screen can also be displayed by touching the
subject.
4Move [+] to the position to be in focus.
•When the picture is displayed in windowed mode, you can enlarge/reduce the picture by
approximately 3 to 6k; when the picture is displayed in full screen, you can enlarge/
reduce the picture by approximately 3 to 10k.
•If you use the HDMI output during recording, the screen cannot be enlarged in windowed
mode.
•On the assist screen, it is also possible to record a picture by touching [ ].
When selecting [ ]
Button
operation
Touc h
operation Description of operation
3/4/2/1Touching Moves [+].
Pinching in/
out Enlarges/reduces the screen (by steps of 0.1k)
sEnlarges/reduces the screen (by steps of 1.0k)
Switches the enlarged display (windowed/full screen)
[DISP.] [Reset] Resets [+] back to the center.