Panasonic DMCGH4YAGH 121, Start time by pressing 3/ 4, and then press, AFirst BSecond CThird

4.Focus and Shutter (Drive Mode) Settings

6Press 3/4 to select the item and then press [MENU/SET].

	[Now]	Starts the recording by fully-pressing the shutter button.
		You can set the time to start recording.
[Start Time] [Start Time		Any time up to 23 hours 59 minutes ahead can be set.
	Set]	Select the item (hour or minute) by pressing 2/1, set
		the start time by pressing 3/4, and then press
		[MENU/SET].
	The recording interval and the number of pictures can be set.
[Shooting	2/1: Select the item (minute/second/number of pictures)
	3/4: Setting
Interval]/
	[MENU/SET]: Set
[Image
	• A recording interval ranging from 1 second to 99 minutes and 59 seconds
Count]
	can be set at 1 second interval.

•The number of pictures ranging from 1 to 9999 can be set.

•Set the recording interval D so that it will be longer than the exposure time (shutter speed) E. (The figure below)

Recording may be skipped when the recording interval D is shorter than the exposure time (shutter speed) E, for example during night-time recording.

A:First

B:Second

C:Third

7Press the shutter button

halfway.		MOV		4:3	AFS
		FHD	24p	L
• The recording screen will be displayed. You can also
perform the same operation by pressing and holding [	] until the recording screen is
displayed.

8Press the shutter button fully.

•The recording starts automatically.

•During recording standby, the power will turn off automatically if no operation is performed for a certain period. The Time Lapse Shot is continued even with the power turned off. When the recording start time arrives, the power turns on automatically.

To turn on the power manually, press the shutter button halfway.

•If [Fn1] is pressed or [ ] is touched while this unit is turned on, a selection screen asking you to pause or end will be displayed. Operate in accordance with the screen.

Also, if [Fn1] is pressed or [ ] is touched during the pause, a selection screen asking you to resume or end will be displayed. Pressing the shutter button fully will also enable you to resume from the pause.

•Confirmation screen for creating a motion picture is displayed next, so select [Yes].

121