Panasonic DMCGH4KBODY, DMCGH4YAGH owner manual 146, Reducing the long shutter noise Long Shtr NR

5.Picture Quality and Color Tone Settings

Reducing the long shutter noise ([Long Shtr NR])

Applicable modes:

The camera automatically removes noise that appears when the shutter speed becomes slower to take pictures of night scenery etc. so you can take beautiful pictures.

> [Rec] > [Long Shtr NR]

Settings: [ON]/[OFF]

•[Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for signal processing.

•We recommend using a tripod when the shutter speed is slowed to take pictures.

Not available in these cases:

•In the following cases, [Long Shtr NR] does not work:

–When [Burst Rate] is set to [SH]

–When [Electronic Shutter] is set to [ON]

Correcting the brightness on the screen periphery ([Shading Comp.])

Applicable modes:

When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected.

> [Rec] > [Shading Comp.]

Settings: [ON]/[OFF]

•This feature may be automatically disabled, depending on the recording conditions.

•Noise in the periphery of the picture may stand out with higher ISO sensitivity.

Not available in these cases:

•Correction is not possible in the following cases:

–Recording still pictures while recording a motion picture [only when set to [ ] (motion picture priorities)].

–When [Burst Rate] is set to [SH].

•Depending on the lens used, [Shading Comp.] may not operate. Refer to the website for compatible lenses.

146