Panasonic DMCGH4YAGH, DMCGH4KBODY owner manual 399, Monitor/Viewfinder

13.Others

Monitor/Viewfinder

The Monitor/Viewfinder turns off although the camera is turned on.

•If no operations are performed during the set time period, [Auto LVF/Monitor Off] (P59) is activated, and the Monitor/Viewfinder turns off.

•When an object or your hand is positioned near the eye sensor, the Monitor display may switch to the Viewfinder display. (P48)

The Monitor/Viewfinder is too bright or dark.

•Check [Monitor Luminance] setting. (P63)

•Perform [Monitor Display]/[Viewfinder]. (P63)

It may flicker for an instant or the brightness of the screen may change significantly for an instant.

•This occurs due to the aperture of the lens changing when the shutter button is pressed halfway, or when the brightness of the subject changes. This is not a malfunction.

The picture is not displayed on the monitor.

•Does the picture appear on the viewfinder?

>Press [LVF] to switch to monitor display. (P48)

•Is the monitor switched off?

>Switch the display by pressing [DISP.]. (P44)

Monitor and viewfinder do not switch when [LVF] is pressed.

•It is only displayed on the monitor when the camera is connected to a PC or printer.

Black, white, red, blue and green dots appear on the Monitor/Viewfinder.

•This is not a malfunction.

These pixels do not affect the recorded pictures.

Noise appears on the monitor.

•In dark places, noise may appear to maintain the brightness of the monitor.

399