Panasonic DMCGH4KBODY, DMCGH4YAGH 348, Press 3/4 to select an item and then press MENU/SET

13.Others

4Press 3/4 to select an item and then press [MENU/SET].

• While the external flash is connected, the following icons are displayed.

: External flash Forced ON

: External flash Slow Sync. Œ: External flash Forced OFF

•Signal-flashing with wireless flashes is also disabled.

When using other commercially available external flashes without communication functions with the camera (DMC-GH4)

•It is necessary to set the exposure on the external flash. If you want to use the external flash in Auto Mode, use an external flash that allows you to set the aperture value and the ISO sensitivity to match the settings on the camera.

•Set to Aperture-Priority AE Mode or Manual Exposure Mode on the camera and then set the same aperture value and ISO sensitivity on the external flash. (The exposure cannot be compensated adequately due to the change on the aperture value in Shutter-Priority AE Mode and the external flash cannot control the light adequately in Program AE Mode because the aperture value cannot be fixed.)

∫Using a external flash by connecting with a flash synchro socket

• You can use an external flash by connecting a synchro cable with a flash synchro socket. The socket has a lock screw to prevent the cable falling off.

• Remove the flash synchro socket cap by turning in the direction of the arrow.

• Be careful not to lose the flash synchro socket cap.

• The flash synchro socket has no polarity. You can use a synchro cable regardless of its polarity.

•Use the flash with a synchronization voltage of 400 V or less.

•Do not use the synchro cables with the length of 3 m (9.8 feet) or more.

348