Panasonic DMCGH4YAGH, DMCGH4KBODY owner manual 319, Using function buttons with touch operations

11.Customizing the Camera’s Settings

∫Configuring the function button settings from the on-monitor recording

information screen

Touching [Fn] on the on-monitor recording information screen (P44) also allows you to display the screen in step 3.

∫Using function buttons with touch operations

[Fn6], [Fn7], [Fn8], [Fn9], and [Fn10] are used by touching function buttons.

1 Touch [ ].

2Touch [Fn6], [Fn7], [Fn8], [Fn9] or [Fn10].

• The assigned function will operate.

Fn6

Fn7

Fn8

Fn9

Fn10

•Some functions cannot be used depending on the mode or displayed screen.

•When set to [Focus Area Set], it is possible to display the position setting screen of either AF area or MF Assist.

•When [1 Shot RAW+JPG] is set, it will record the RAW file and a fine JPEG image simultaneously once only. It will return to original quality after recording.

•When [1 Shot Spot Metering] is set, it will record with [Metering Mode] set to [ ] (spot) once only. It will return to original Metering Mode after recording.

•Operations of the cursor button, [MENU/SET], and the control dial are disabled when [Cursor Button Lock] is set. Press the function button again to enable them.

•When [Restore to Default] is set, function button settings return to the default configuration.

Not available in these cases:

•[Fn4] cannot be used in the following cases.

–Intelligent Auto Mode

–Intelligent Auto Plus Mode

–Creative Control Mode

–When using [Multi Exp.]

•[Fn1] cannot be used during Time Lapse Shooting.

•[Fn6], [Fn7], [Fn8], [Fn9], and [Fn10] cannot be used when the viewfinder is in use.

319