Frequently-Asked Questions

The infrared port does not work.

Check the following:

Make sure that the infrared ports of the two devices are facing each other (+/- 15 degrees) a maximum of 1 meter apart.

Make sure there is a clear path between the two infrared ports. Nothing should be blocking the ports.

Make sure you have the appropriate software running on both devices (for file transfers) or you have the appropriate drivers (for printing to an infrared printer).

During POST, press F2 to access the Setup Utility. Go to the Advanced screen and verify that the infrared port is enabled.

Make sure both devices are IrDA-compliant.

I want to set up my location to use the internal modem.

To properly use your communications software (e.g., HyperTerminal), you need to set up your location:

1.Open the Windows 98/Windows 95 Control Panel and double-click on the Modems icon.

2.Click on Dialing Properties and begin setting up your location.

Refer to the Windows 98/Windows 95 manual.

102

User’s Guide

Page 122
Image 122
Acer 710 Series manual User’s Guide, Infrared port does not work, Want to set up my location to use the internal modem