Acer 710 Series manual Ejecting the CD-ROM Tray, Swapping Modules

Storage

Ejecting the CD-ROM Tray

To eject the CD-ROM drive tray when the computer is turned on, press the CD-ROM eject button.

Note: When power is off, you can eject the CD-ROM drive tray using the emergency eject hole. See page 100.

Swapping Modules

The flexible media bay allows you to swap the standard CD- ROM drive with other high-capacity media modules such as a DVD-ROM drive, an LS-120 drive or a second hard disk.

Follow these steps:

1.Shutdown the computer.

2.Locate the media bay release latch; then slide the latch towards the media bay and hold.

3.Grasp the media bay release grip area and pull the module out of the media bay; then release the media bay release latch.

Chapter 1 Getting Familiar with your Computer 19