Acer 710 Series manual Setting the User Password

Notebook Manager

Setting the User Password

To set the User Password, follow these steps:

1.Click on the Change User Password button.

2.Click on the Enable User Password checkbox.

3.Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z, a-z, 0-9) which you want to be your User Password.

4.Click in the Confirm Password textbox and retype the password.

5.Click on OK to accept.

Note: To change a password, follow the same steps used to set a password. To remove a password, follow the same steps used to set a password but leave both fields blank.

You can also set password checks when the computer boots up and/or when the computer resumes from standby/ hibernation mode. Simply click on the desired checkbox(es) and click on Apply.

Chapter 5 Software 79