Connecting VANTAGE-HD to the Display Device | Calibre UK instruction

CONNECTING VANTAGE-HD TO THE DISPLAY DEVICE

2.1.Correct Installation Order

The flow chart below details the correct order in which to install your Vantage-HD, following this order will ensure trouble free installation.

Issue 1.0.2

28 March 2006 © Calibre UK Ltd

Page 3 of 30

Image 6

Calibre UK manual Connecting VANTAGE-HD to the Display Device

Contents

VANTAGE-HD Copyright & Limited Warranty Welcome to the Vantage-HD Manual Contents Product Description Below details the connections to Vantage-HD Connecting VANTAGE-HD to the Display Device Switch on Connect PowerConfigure Output mode Select display Device resolution Image Select OutputFrame Rate Projection Optimize Display Device Setup Pixel Clock and Phase Adjustments Within the Display Warp Correction Setting AudioDelay Mode Gamma Connecting VANTAGE-HD Inputs Reset Channel Freeing Input Channels Selecting AN Input Adjusting AN Input Pixel Clock & Phase Video input signals only Mpeg Black Level Color temperatureInput gamma mode Input Capture Positioning the PIP Picture in PictureSelecting the input OSD not visible Picture In Picture Menu Issue Input Source Information MenuVantage-HD Information Vantage revision Input Format Configuration Menu 0SD Timeout Infoscreen TimeoutFactory Reset Output Mode Details VBPPage Input Signal Details NTSC, PAL, SecamPage Power Supply Specification Regulatory Approvals Environmental and Safety Safety Warning Hdmi Connection Advice Issue Warranty & Service Advice