Calibre UK VANTAGE-HD manual Configuration Menu, Language, Menu Colors, Transparent Menu, DEffect

CONFIGURATION MENU

9.1.Introduction

The Configuration Menu allows the user to customize the "look and feel" of the Vantage-HD user interface

Language	Allows selection of the language for the OSD, current options are
	English (American) - default
	English (British)
	Francais
	Deutsch
Menu Colors	Allows selection of the color scheme for the OSD, options are
	Blue - default
	Gray
	Green
Transparent Menu	Allows the displayed image to be viewed through the OSD menu by
	making the OSD semi-transparent. Default is off
3-D Effect	Changes the menu borders between flat (default) and 3-D effect
HDMI Audio Input	Allows the HDMI operation mode to be changed between Repeater
	and Receiver.
	When configured as a Repeater, the HDMI capabilities of your
	attached display device are relayed through Vantage-HD to your
	HDMI source equipment.
	When configured as a Receiver, the HDMI capabilities seen by your
	source equipment are fixed by Vantage-HD and do not relate directly
	to the capabilities of your attached display device.
	If using audio from the HDMI output of Vantage-HD together with
	HDMI audio from your source equipment, you should always select
	Repeater, otherwise the audio signal presented to your display device
	may not be compatible with it.
	If using HDMI audio inputs to Vantage-HD from your source
	equipment, but using the Coaxial or Optical audio outputs from
	Vantage-HD, you should always select Receiver, otherwise multi-
	channel audio may not be available from the Coaxial or Optical audio
	outputs.
	If you find that the HDMI behavior of your source or display
	equipment is erratic or not as expected, try changing the HDMI mode
	since some display devices and some source equipment do not
	correctly support Repeater mode.

IMPORTANT:

i)Before changing from Receiver to Repeater mode, make sure your display device is connected and turned on.

ii)Before changing from Receiver to Repeater, or from Repeater to Receiver, we recommend that you disconnect or power down any connected HDMI source equipment.

Note: Use of analog audio outputs with HDMI audio inputs is not

Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 19 of 30