Calibre UK VANTAGE-HD manual Input Signal Details, NTSC, PAL, Secam

INPUT SIGNAL DETAILS

11.1.Introduction

This section provides technical details for all possible inputs please refer to the model specification to determine which inputs can be displayed by your Vantage-HD.

11.2.Video Inputs

Composite via RCA jacks

S-Video via 4-way mini DIN socket

Signal formats	Composite (CVBS), S-Video (Y/C), Standards
	NTSC, PAL, SECAM
Composite (CVBS) input level	1V p-p nominal inc. sync
Luminance (Y) input level	1V p-p nominal inc. sync
Chrominance (C) input level	0.6V p-p nominal
Input Impedance (all inputs)	75 Ohms

11.3.Component Video Input Via 3 or 5 RCA jacks

YPbPr, YPbPrS, RGB and RGB(S) component video

Signal formats 484i and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz and 1080p at 24, 25 and 30Hz.

Please note this input does not support Computer SVGA signals which should be connected via the Computer SVGA input

11.4.SDI Input (optional)

Format:	SD-SDI and HD-SDI YCbCr 4:2:2 serial digital component video
Input impedance:	75 ohms.

SMPTE 292M and SMPTE 259M-C compliant

11.5.HDMI Input

HDMI format 1.1 with HDCP Signal formats

484i and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz and 1080p at 24, 25 and 30Hz

	1080p at 50 and 60Hz
11.6.	Computer (SVGA) Inputs
	Signal formats: DOS	720 x 400	70Hz
	VGA	640 x 480	60Hz to 75Hz inclusive
	SVGA	800 x 600	56Hz to 75Hz inclusive
	XGA	1024 x 768	60Hz to 75Hz inclusive
	WXGA	1280 x 768	60Hz to 75Hz inclusive
	SXGA	1280 x 1024	60Hz
	RGB video level	0.7V - 1.0V
	RGB input impedance	75 Ohms
	Sync formats

1.Separate H & V sync at TTL levels.

Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 23 of 30