Calibre UK VANTAGE-HD manual Adjusting An Input

ADJUSTING AN INPUT

6.1.Introduction

When an input channel has been selected, an input type dependent Picture Controls menu can be accessed. Note that for this menu to be fully accessible, a valid video input signal MUST be connected to the chosen video input channel. All settings on the Picture Controls menu are stored separately for each input channel and so do not affect the other inputs. Note: Default settings for many items are dependent on the type of input channel and the type of display device chosen.

To adjust the picture settings, scroll to the Picture Controls menu then press the right navi. key to enter that menu.

MANY SETTINGS ARE SIGNAL-TYPE DEPENDENT. NOT ALL ADJUSTMENTS ARE PRESENT FOR EVERY INPUT SIGNAL TYPE, THE LIST BELOW SHOWS ALL POSSIBLE OPTIONS BUT THESE ARE NEVER ALL AVAILABLE SIMULTANEOUSLY SINCE SOME ARE EXCLUSIVE TO ONE INPUT TYPE, SOME ARE EXCLUSIVE TO ANOTHER INPUT TYPE. BE SURE TO HAVE THE CORRECT INPUT SOURCE CONNECTED AND RUNNING, OTHERWISE THE CONTROLS MAY NOT HAVE THE DESIRED EFFECT WHEN THE ACTUAL SIGNAL IS CONNECTED.

Brightness	Control of background level
Contrast	Control of video gain
Sharpness	Control of the sharpening enhancement filters' levels. (video input
	signals only)
Color	Saturation and Hue controls on a sub menu (video input signals only)
Pixel Clock & Phase	A submenu allowing adjustment of the pixel clock (total number of pixel
	clocks per line) and the pixel phase for the SVGA (RGBHV) input only.
	This menu item only appears with the SVGA input selected.
Auto Setup	Automatically adjusts the pixel clock and phase settings for the SVGA
	input. This menu item only appears with the SVGA input selected.
Picture Format	Aspect Ratio control list for selection of correct format
Contrast Enhance	Preconfigured contrast enhancements which can be selected to suit your
	personal requirements and the material being viewed.

Picture Controls Menu

Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 13 of 30