Calibre UK VANTAGE-HD manual Select display 9device resolution

Picture 1 Select Display Device Type

Select display

9device resolution

Choose the correct display resolution by scrolling down to the Resolution menu item and pressing OK to display the list of available modes. Note the scroll bar at the left of the list - it is too long to display the full list on screen so you must scroll up and down it to see all modes.

For best performance it is critical that you select a mode which is equal to the native resolution of the display device you are using, provided that the display supports its native mode. This is to ensure that the internal scaling within your display device is not operating.

Depending on the mode you choose, Vantage-HD may have to re-boot to change resolution. If this occurs you need to re-enter the Output menu by pressing Menu, scrolling to Output Menu with the up/down keys and entering the Output Menu with the right key

Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 5 of 30