FREEING INPUT CHANNELS
4.1.Freeing a Video Channel
Should you wish to disable a video input, you may do so by re-selecting that video channel from the Input Connections menu, selecting the Disable Channel function and then selecting Yes from the warning message which appears. Disabling a video input channel not only removes it from the input selections list, it also erases its name and de-allocates its associated audio channel.
Note: If all possible input channels are disabled, the OSD will exit at the point at which the last channel is disabled. This is because there are now no valid inputs so Vantage-HD has switched to its unconfigured (default) mode of operation. In this default mode the input channel to be displayed is undefined so may vary randomly. To start re-defining the input channels, press the Menu button again and use the navi-keys to re-enter the Input Connections menu.
4.2.Freeing an Audio Channel
Should you need to free up a previously allocated channel, go to that video input channel and select a different audio channel or no audio channel for association with that video input channel.
Press OK when you have chosen the correct audio channel.
Note: HDMI inputs by default associate themselves with the HDMI audio on that HDMI video channel. You can change this to any available digital or analog audio input if you wish, but cannot cross-select audio from a different HDMI video channel, e.g. HDMI2 can use audio from HDMI2 or from any analog or digital audio input, but HDMI2 video cannot be associated with audio from HDMI1 input. Calibre recommends use of Coaxial or Optical digital audio where the source device allows.
Issue 1.0.2 | 28 March 2006 © Calibre UK Ltd | Page 11 of 30 |
